Page 2 - window_system
P. 2

WEALDEN TOOL
      NEW PRODUCTS                                                               Quality products - quality service
                                                       COM PAN Y
                                                                               B                       D

         9 DEGREE SILL PROFILE                                               55


           Part No.       A        B      C       D        15.4
           T5928B 1/2  12.7mm   59mm      1/2    40mm
                                                         A                                                        C
         A two flute cutter with bearing guide
         for producing a 9 degree sill
         moulding. This large cutter needs to                                     9°
         be used in a table with suitable fence                                        r8
         and guides and the cut should be
         approached in several stages.



         DRIP BAR PROFILE
                                                                                                   C

         A two flute bearing guided cutter to mould a
         drip groove for sills.



           Part No.       A         B      C      D                                   D
           T5920B 1/2    3.0mm   15mm     1/2    45mm





                                                                                      B
                                                                                         r4
                                                                                                           30°


                                                                                             A
                                                                                                 22mm




         SASH BOTTOM RAIL BEVEL & DRIP                                                         C



           Part No.       A         B      C      D
                                                                                 D
           T5917 1/2    50.0mm   61mm     1/2    40mm



         Moulding cutter for sash
         bottom rail with 9 degree
         taper and double drip
         grooves.
         This is a large cutter and                                                                          r3.5
         needs to be used with                                                   B
         caution and at a speed
         of 15,000 rpm maximum
                                                                                                        r3.5


                                                                                                     81°
                                                                                              A
         All prices on page 4

      Orderline 01580 890500                                2                            Fax orders 01580 890222
   1   2   3   4