Page 3 - Router Catalogue 2021

2021/22 W EALDEN TOOL

COMPANY

ROUTER CUTTERS & B ORING BITS

This catalogue illustrates the Wealden professional range Please note the following general points when ordering.
of TCT and STC router cutters and boring bits. In general Quote the shank size required on your order, as many
all dimensions are in millimetres unless stated. Shank cutters are available in more than one shank diameter.
sizes (usually dimension “C”) are in fractional inch sizes, Check that the cutter will fit your machine, particularly
although some cutters are now also available in 8mm the aperture in the base. Many of the large diameter
shank where shown. The illustrations in the catalogue cutters need to be used at reduced speeds, or in fixed
contain dimensions which will be found in the machines: this is detailed in the notes on the cutter. All
accompanying table. Illustrations of the cuts produced are cutters are for Right Hand rotation unless otherwise
not to scale, unless stated. If you require actual size stated. Please also note the information on the inside back
profiles of the cuts a set of full size profiles sheets, which cover regarding safe use and, in particular, do not select
covers most of the cutters, is available free of charge on straight cutters that are longer than required.
request or is downloadable from our web site.

CUTTER GROUP INDEX
(full index on page 127)

Cutter group Description See pages Cutter group Description See pages
Two flute cutters
2 – 14,71,93 Cavetto 56,57
Straight & Spiral
22,55,56
Dovetail 18,57,58 Classical
62,63

15,16,17 23,64,93
Ovolo/Round Over Decorative Moulds
21–24,94 100,106
25,26,38,58
Radius/Cove Multi Profile 77,90,94,95
97,98

Chamfer/Bevel/ 27,28,29,31 16,51,52,93
Handrail & Torus
V Groove 32,46,58 95, 107

Tenon, Rebate, & ‘T’ 15,33,34, Barley Twist &
64,100
Slot 35,92,96 Cornice
24,36–38 Drawer Lock &
Ogee 67, 99
62,64,102 Drawer Pull

Trimmers 6,32,40–50 Sash Bar & Window 59,61,98,99

Door – Window & 82,83,84,85,
Beading 25,51–54,95
Weather Seal 86
65,72,78,79,
Tongue/Groovers Surfacing 15,59,92
80,90

65,66,67,76
Jointing Solid Surface 38,86,91,92
89
Drilling/Boring &
Profile Scriber Sets 61,68–72 108–120
Plug Cutters

24,29,74,76 Miniature, Dolls’
Panel Raise 93,94,95
102 House & Modelling

COPYRIGHT © 2021 Wealden Tool Company. No part of this publication may be transmitted or reproduced by any means without our express permission. All rights reserved.
Wealden Tool Company is a trading name of Wealden Tool Company Limited. Registered in England number 4697332