Page 77 - Rout2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

PANEL RAISING

A range of large
diameter two wing
cutters in ½" shank
to produce raised
panels. The cutters
are supplied with
guide bearings
T1934½ T1935½
which may be
removed to increase
the tongue length
(dimension “E”).
Cutter illustrations
are 70% full size.
N.B. THESE ARE
LARGE DIAMETER
CUTTERS FOR
USE IN FIXED
HEAD MACHINES
ONLY AND AT
12,000 rpm
MAXIMUM SPEED.
THEY ARE NOT T1936½ T1937½
SUITABLE FOR
USE IN PORTABLE
ROUTERS.

Part No. A B C D E F G H
T1934 1/2 86mm 13mm 1/2 45mm 10mm 26.5mm – 7mm
T1935 1/2 86mm 15mm 1/2 45mm 10mm 26.5mm 24mm 9mm
T1936 1/2 86mm 13mm 1/2 45mm 10mm 26.5mm 40mm –
T1937 1/2 86mm 16mm 1/2 45mm 10mm 26.5mm 5mm 10mm

Replacement parts
Part No. Description

TB411 Bearing
TS704 Spacer

BACK CUTTER KIT

A cutter and fitting kit to convert the above
panel raising cutters to rebate the back of
thicker panels at the same time as cutting
the raise. A tongue thickness of 6mm is
produced when using this cutter.

Part No. Description
T1960 Back cutter kit
Profiles above are shown full size

Orderline 01580 890500 75 Fax orders 01580 890222