Page 124 - Router Catalogue 2021

WEALDEN TOOL
ROUTING ACCESSORIES Quality products - quality service
COM PAN Y

EZE-LAP DIAMOND SHARPENERS

Maintenance of cutters is important and keeping a sharp edge on cutters will ensure a
good finish to the work and longer cutter life. The diamond hand lap is ideal for honing
router cutters and the fine grade is suitable for most general sharpening. For a really fine
finish to the cutting edge give the cutter an extra hone with the superfine grade.
The covers of the EZE-fold hone fold back to provide a substantial handle. The overall
length when open is 225mm. Part numbers SL031 & SL032 are double sided.
Bench stones are available in various sizes and and have a substantial 6.3mm thick metal
back plate. A stone holder is available with non-slip rubber feet to provide stable support
when using the sharpening stone.
The shaft type hones are ideal for sharpening knife blades etc. The SL035 features a
substantial brass handle/cover whilst the SL034 has a pen cover with a'D' shaped rod.
NB All sizes quoted below refer to the size of the diamond sharpening area.

Hand laps DIAMOND GRITS
Part No. Size Grade Superfine 1200
Fine 600
SL001 50mm x 19mm Superfine Hand laps
Medium 400
SL002 50mm x 19mm Fine Coarse 250
SL003 50mm x 19mm Medium
SL004 50mm x 19mm Coarse
What's special about EZE-LAP
EZE-Fold hones diamond sharpeners?

Part No. Size Grade Made in the USA using a patented process
that traps the diamond particles in a hard
SL026 100mm x 19mm Superfine stainless alloy. This process produces a
consistent,flat,long-lasting product that has
SL027 100mm x 19mm Fine
approximately 40% more diamond cutting
SL028 100mm x 19mm Medium area than the perforated type. There is no
EZE-FOLD hones needtouseanywaterwhensharpening with
SL029 100mm x 19mm Coarse
EZE-LAP products but the diamond faces
SL031 100mm x 19mm Superfine/Medium benefit from an occasional de-clogging with
SL032 100mm x 19mm Fine/Coarse soap and water and a scrubbing brush.
• Fine grade is fast cutting and suitable for
most honing operations
Bench stones
• Ideal for carbide cutters, planer knives
Part No. Size Grade and all types of cutting tools.
• All bench stones are 6.3mm thick and
SL014 150mm x 50mm Fine supplied complete with a leather pouch.
SL015 150mm x 50mm Medium
SL018 200mm x 50mm Superfine
SL019 200mm x 50mm Fine
SL020 200mm x 50mm Medium
SL023 200mm x 75mm Fine
SL024 200mm x 75mm Medium

Bench stone
Stone holder
Part No. Stone size range
SL009 150mm to 220mm

Shaft-type hones
Stone holder
Part No. Size Grade
SL034 57mm x 4mm Fine
SL035 95mm x 6.3mm Fine
Shaft hones

Orderline 01580 890500 122 Fax orders 01580 890222