Page 13 - Router Catalogue 2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

SPIRAL CUTTERS – MICRO-GRAIN SOLID CARBIDE

These two flute up-cut tools are designed to pull chips up and away from the part that is being cut and, in addition, will prevent burning
when plunge cutting. Delivers a very satisfactory cut with fast chip exit and removal. Upcut spirals should only be used on equipment
with good vacuum hold down or clamping devices. Any failure of the clamping will allow the part to move and will result in tool
breakage. Upcut spirals should be chosen if dust or chips present problems.

UP – CUT SPIRAL

Part No. A B C D
mm inch mm shank mm
C
T1U3000 ------- 3.00 ------ 0.118 ----- 12.0 --- 3mm ----- 50.0
T1U3000L ------ 3.00 ------ 0.118 ----- 12.0 --- 3mm ----- 64.0
T4U3000 ------- 3.00 ------ 0.118 ----- 12.0 ---- 1/4 ------ 50.8
T4U3175 ------- 3.18 ------- 1/8 ------- 12.7 ---- 1/4 ------ 50.8
T4U3967 ------- 3.97 ------- 5/32 ------ 12.7 ---- 1/4 ------ 50.8
T4U4000 ------- 4.00 ------- 5/32 ------ 14.0 ---- 1/4 ------ 50.8
T4U4762 ------- 4.76 ------- 3/16 ------ 19.0 ---- 1/4 ------ 50.8 D
T4U5000 ------- 5.00 ------ 0.197 ----- 19.0 ---- 1/4 ------ 50.8
T8U5000 ------- 5.00 ------ 0.197 ----- 19.0 --- 8mm ----- 76.2
T1U5000B ----- 5.00 ------ 0.197 -----22.0 --- 5mm ----- 64.0 B
T4U6000 ------- 6.00 ------ 15/64 ----- 19.0 ---- 1/4 ------ 50.8
T6U6000 ------- 6.00 ------ 15/64 ----- 27.0 --- 6mm ----- 60.0
T8U6000A ----- 6.00 ------ 15/64 ----- 19.0 --- 8mm ----- 76.2
T8U6000B ----- 6.00 ------ 15/64 ----- 25.0 --- 8mm ----- 76.2 A
T4U6350 ------- 6.35 ------- 1/4 ------- 25.4 ---- 1/4 ------ 63.5
T2U7937 ------- 7.94 ------- 5/16 ------ 25.4 ---- 1/2 ------ 76.2
T8U8000B ----- 8.00 ------- 5/16 ------ 25.0 --- 8mm ----- 76.2
T8U8000C ----- 8.00 ------- 5/16 ------ 32.0 --- 8mm ----- 76.2
T2U9525 ------- 9.53 ------- 3/8 ------- 31.7 ---- 1/2 ------ 76.2
T2U1000B ----- 10.0 ------ 25/64 ----- 32.0 ---- 1/2 ------ 76.2
T2U1000L ------ 10.0 ------ 25/64 ----- 40.0 ---- 1/2 ------ 88.9
T2U1200C ----- 12.0 ------ 15/32 ----- 38.0 ---- 1/2 ------ 88.9
T2U1200L ------ 12.0 ------ 15/32 ----- 54.0 ---- 1/2 ----- 101.6
T2U1270A ----- 12.7 ------- 1/2 ------- 31.7 ---- 1/2 ------ 76.2
T2U1270C ----- 12.7 ------- 1/2 ------- 38.1 ---- 1/2 ------ 88.9
T2U1270E ----- 12.7 ------- 1/2 ------- 50.8 ---- 1/2 ----- 101.6
T2U1270G ----- 12.7 ------- 1/2 ------- 65.0 ---- 1/2 ----- 115.0

SINGLE FLUTE UP and DOWN CUT SPIRALS

Part No. A B C D CUT
These single flute tools are
mm inch mm shank mm up/down designed for high performance
routing. They offer fast cut rates
T4DS3000 -------- 3.00 ---- 0.118 ---- 12.0 ----- 1/4" ------ 50.0 down but at reduced surface finish.
T1D4000CZ1 ----- 4.00 ----- 5/32 ----- 20.0 ---- 4mm ----- 64.0 down Single flute cutters may tend to
T8DS8000 -------- 8.00 ----- 5/16 ----- 25.0 ---- 8mm ----- 76.2 down cut undersize in hand routing
applications.
T4US3000 -------- 3.00 ---- 0.118 ---- 12.0 ----- 1/4" ------ 50.0 up
T6US6000B ------ 6.00 ---- 15/64 ---- 22.0 ---- 6mm ----- 60.0 up
TNU06006027 --- 6.00 ---- 15/64 ---- 27.0 ---- 6mm ----- 60.0 up

Orderline 01580 890500 11 Fax orders 01580 890222