Page 14 - Router Catalogue 2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

SPIRAL CUTTERS – MICRO-GRAIN SOLID CARBIDE

These two flute compression spirals have up and down shear cut on the same cutter. This provides down shear
cutting on the top and up shear cutting on the bottom of boards. They are ideal for edge trimming on double faced
veneered boards. These cutters ensure a good finish on both faces of laminated and solid timber boards.
N.B. Check you have the correct size collet for the cutter you are ordering as some cutters have metric shank sizes.

COMPRESSION SPIRAL

Part No. A B C D E
mm inch mm shank mm mm

T1C3000 ------- 3.00 ------ 0.118 ------ 20 ---- 3mm ---- 64.0 ---- 3.8
T1C4000 ------- 4.00 ------- 5/32 ------- 20 ---- 4mm ---- 64.0 ------ 5
T1C5000M ----- 5.00 ------ 0.197 ------ 20 ---- 5mm ---- 64.0 ------ 3
T6C6000M ----- 6.00 ------ 15/64 ------ 22 ---- 6mm ---- 64.0 ---- 3.5
T4C6350 ------- 6.35 ------- 1/4 -------- 25 ----- 1/4 ------ 64.0 ------ 6
T4C6350M ----- 8.00 ------- 5/16 ------- 25 ---- 8mm ---- 64.0 ---- 3.5
T8C8000 ------- 8.00 ------- 5/16 ------- 25 ---- 8mm ---- 70.0 ------ 7
T8C8000M ------- 8.0 ------- 5/16 ------- 25 ---- 8mm ---- 70.0 ------ 5
T3C9525 ------- 9.53 ------- 3/8 -------- 32 ----- 3/8 ------ 76.2 ----- 12
T3C9525M ----- 9.53 ------- 3/8 -------- 32 ----- 3/8 ----- 76.2 ------ 5
T9C1000XM --- 10.0 ------ 25/64 ------ 12 --- 10mm ---- 70.0 ------ 2
T9C1000 ------ 10.00 ------ 25/64 ------ 35 --- 10mm ---- 80.0 ------ 9
T2C1270 ------ 12.70 ------- 1/2 -------- 42 ----- 1/2 ---- 102.0 ----- 13
T2C1270M --- 12.70 ------- 1/2 -------- 25 ----- 1/2 ------ 66.9 ------ 9

SPIRAL TRIMMERS STC

A new range of solid tungsten carbide trimming cutters
fitted with double bearing guides. The shearing action
provides an exceptionally clean cut and the small
diameter enables trimming into tight corners. The down
shear trim produces a clean top edge finish on veneered
boards etc.
UP – CUT SPIRAL spares:

Part No. A B C D Bearing
T4UT6350 6.35mm 26mm 1/4" 75mm TB250
T8UT8000 8.00mm 30mm 8mm 80mm TB208
T2UT1270 12.70mm mm 1/2" 100mm TB500

DOWN – CUT SPIRAL spares:

Part No. A B C D Bearing
T4DT6350 6.35mm 26mm 1/4" 75mm TB250
T8DT8000 8.00mm 30mm 8mm 80mm TB208
T2DT1270 12.70mm mm 1/2" 100mm TB500 up–cut down–cut

Orderline 01580 890500 12 Fax orders 01580 890222