Page 64 - Router Catalogue 2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

CLASSIC OGEE

Two fluted bearing guided edge mould cutters with a classical ogee profile.

Part No. A B C D E
T2640B 25.4mm 12.7mm 1/4 38mm 3.2mm
T2641B 1/2 25.4mm 12.7mm 1/2 40mm 3.2mm
T2642B 28.7mm 16.0mm 1/4 38mm 4.0mm
T2643B 1/2 28.7mm 16.0mm 1/2 40mm 4.0mm

CLASSIC PANEL – GUIDED

Two fluted panel cutter with a top mounted bearing. The bearing is the same diameter
as the cutter and enables top mounted templates to be used when applying
decorative moulds to panels etc. The cove on the bottom of the cutter produces a
deeper mould than the classic ogee below.

Part No. A B C D E F
T1622B 22mm 12.7mm 1/4 40mm 4mm 5.5mm

Replacement parts
Part No. Description

TC6300 Collar
TB910 Bearing

CLASSIC OGEE – GUIDED

Two fluted panel cutter with a top mounted bearing. The bearing is the
same diameter as the cutter and enables top mounted templates to be used
when applying decorative moulds to panels etc. The flat bottom of the cutter
produces a shallower mould than the classic panel cutter above.

Part No. A B C D E
T1642B 22mm 10mm 1/4 40mm 3.2mm

Replacement parts
Part No. Description

TC6300 Collar
TB910 Bearing

Orderline 01580 890500 62 Fax orders 01580 890222