Page 57 - Router Catalogue 2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

COVE & BEAD

A two flute decorative profile cutter, particularly suitable for table top edges. Can be used
in a variety of ways to produce decorative mouldings, special skirtings and architraves etc.
The cutter as supplied is not bearing guided, and is intended to be used either in
conjunction with a fence or roller guide on the machine. A guide bearing kit TB2600 is
available to enable the cutter to be used freehand for producing skirting, architraves etc.
or to follow a bottom mounted template.

Part No. A B C D E F
T2603 1/2 27mm 27mm 1/2 40mm 16mm 7mm
T2602 1/2 33mm 30mm 1/2 40mm 22mm 10mm
T2601 1/2 39mm 34mm 1/2 40mm 27mm 13mm

Guide bearing kit
(order separately)

Part No.
TB2600

CLASSIC DECORATIVE BEAD

A two flute cutter with a decorative and detailed bead profile. The cutter may be used
to produce intricate moulded edges. Its main use however is to produce a classic bead
moulding using two passes of the cutter. This moulding will find many uses in furniture
making where it is “planted on” to provide a classical decorative bead.
A guide bearing kit TB2720 is available to convert this cutter for bearing guided
operation. The kit should be ordered separately.

Part No. A B C D E
T2725 1/2 51.7mm 26mm 1/2 40mm 19.5mm

Guide bearing kit
(order separately)

Part No.
TB2720
Profiles approximately full size

SUNK BEAD

A two flute cutter to produce a bead which is sunk below the
surface of the workpiece. This type of sunk bead is mainly used
to produce decorative edges and faces on furniture frames. The
cutter is normally used to produce a single bead, however two or
more passes may be made to produce a multiple bead effect.

Part No. A B C D E
T2570 6mm 8mm 1/4 38mm 22mm

Orderline 01580 890500 55 Fax orders 01580 890222