CNC Groovers & Arbors

These groovers, when used with the accompanying arbors, will enable the machining of horizontal grooves on CNC machines. The design of the cutters enables grooves to be cut right down to the spoil board.
Groovers and arbors are sold separately. You will need to select a groover plus an arbor, if you don't already have one.
These need to be run at 12,000 to 14,000 rpm with a feed rate of 10 - 20 m/min.
Many of the weatherseal groovers from our hand routing range may be used on CNC machines in combination with the arbors listed here. Please contact our technical department for more information.
See a video about these groovers in use on a CNC router.