Call us on: 01580 890500

All our prices include UK VAT unless stated

45 Degree Chamfer

Two flute cutter with guide bearing to produce chamfered edges. Used for relieving edges on frames, legs, sills, mouldings etc. Stopped chamfers can be an attractive decoration for beams, gates etc.
N.B. The T917B½ and T918B½ are large cutters and should be used at 16,000 RPM MAXIMUM, please also ensure this cutter will fit through the base of your machine.

45 Degree Chamfer
45 Degree Chamfer
45 Degree Chamfer
45 Degree Chamfer
  • 45 Degree Chamfer Thumbnail
  • 45 Degree Chamfer Thumbnail
  • 45 Degree Chamfer Thumbnail
  • 45 Degree Chamfer Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T914B 7.0mm11mm1/4"38mm24mm9mm T914B
  • £23.28
T916B 12.0mm16mm1/4"38mm34mm17mm T916B
  • £27.12
T916B-8 15.0mm20mm8mm38mm40mm21mm T916B-8
  • £27.12
T916B-1/2 14.6mm20mm1/2"40mm42mm20mm T916B-1/2
  • £29.04
T919B-1/2 19.0mm30mm1/2"38mm50.7mm26.8mm T919B-1/2
  • £45.00
T917B-1/2 25.0mm30mm1/2"40mm63mm35mm T917B-1/2
  • £65.52
T918B-1/2 30.6mm35mm1/2"40mm74mm43mm T918B-1/2
  • £98.04
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...