Call us on: 01580 890500

All our prices include UK VAT unless stated

Beading Large

A bearing guided two flute cutter suitable for producing a side bead, corner bead or torus bead. A single cut will produce the side or edge bead, and the step dimension 'G' may be altered by fitting different sized bearings. A double cut will produce a corner bead. Ensure that the cut on the first side is stepped in from the edge of the workpiece by the same distance as dimension 'G'. This will ensure that a true bead is produced. The cutter may also be used to produce a torus bead with a fillet up to 'B' in width.
N.B. The cutter will be supplied fitted with TB625 bearing. Other bearings to alter the 'G' dimension can be selected using the link below and need to be ordered separately.


Select the additional bearings you require to be supplied with your cutter to give the 'G' dimension you require.
Go to Bearings pageX
Beading Large
Beading Large
Beading Large
  • Beading Large Thumbnail
  • Beading Large Thumbnail
  • Beading Large Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T2503B 6.4mm11mm1/4"38mm28mm1.3mm T2503B
  • £40.68
T2503B-8 6.4mm11mm8mm38mm28mm1.3mm T2503B-8
  • £31.80
T2503B-1/2 6.4mm11mm1/2"40mm28mm1.3mm T2503B-1/2
  • £40.48
T2509B-8 8.0mm10mm8mm38mm29mm1.5mm T2509B-8
  • £37.80
T2504B 9.5mm8mm1/4"38mm30mm1.5mm T2504B
  • £39.12
T2504B-1/2 9.5mm8mm1/2"40mm30mm1.5mm T2504B-1/2
  • £42.24
T2505B-1/2 12.7mm10mm1/2"40mm33mm1.8mm T2505B-1/2
  • £48.48
T2506B-1/2 16.0mm10mm1/2"40mm36mm2.0mm T2506B-1/2
  • £47.88
T2507B-1/2 19.0mm9mm1/2"40mm40mm2.0mm T2507B-1/2
  • £53.40
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...