Groover 60

A range of three wing heavy duty slotting cutters for mounting on 8mm arbors. The large diameter cutters offer the ability to cut grooves up to 22.5mm deep when used with a router fence. They may be used with guide bearings, selected from the table below, to control the depth of cut. These cutters give a fast cutting rate and fine surface finish. Uses include grooving, trimming, rabbeting etc.
Recommended speed for these cutters is 15,000 rpm.
N.B. These groovers will need an arbor to mount them on, as they are not supplied with an arbor. Any arbor which suits 8mm bore cutters will be satisfactory.